Last Modified: 11-29-2007 1.6 A
Service Category: Vehicle Exterior Section: Wiper/Washer
Model Year: 2008 Model: Sequoia Doc ID: RM000003F15000X
Title: WIPER / WASHER: REAR WIPER MOTOR: REMOVAL (2008 Sequoia)

REMOVAL

1. REMOVE POWER BACK DOOR ROD (w/ Power Back Door) DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

2. REMOVE BACK DOOR CENTER GARNISH DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

3. REMOVE BACK DOOR SIDE GARNISH RH DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

4. REMOVE BACK DOOR SIDE GARNISH LH DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

5. REMOVE BACK DOOR STRAP COVER DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

6. REMOVE BACK DOOR PULL STRAP DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

7. REMOVE BACK DOOR TRIM BOARD ASSEMBLY DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

8. REMOVE BACK DOOR SERVICE HOLE COVER DOOR / HATCH: BACK DOOR: DISASSEMBLY (2008 Sequoia)+

9. REMOVE REAR WIPER ARM HEAD CAP

(a) Disengage the claw and remove the rear wiper arm head cap.

10. REMOVE REAR WIPER BLADE ASSEMBLY

(a) Remove the nut and remove the rear wiper blade assembly.

11. REMOVE REAR WIPER MOTOR ASSEMBLY

(a) Disengage the clamp and disconnect the connector.

(b) Loosen the 3 bolts and remove the rear wiper motor.

NOTICE:

Do not try to remove the bolts since they are integrated with the motor.

12. REMOVE REAR WIPER MOTOR GROMMET

(a) Remove the rear wiper motor grommet.